Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  V-850 / VX-1250

Do It Yourself Maple Sub-woofer Cabinet Kit; Miller & Kreisel (M&K) V-850/VX-1250, A-Stock.

Everything you need except a <Miller & Kreisel (M&K) VX-1250 Sub-woofer Plate Amplifier, and <12" 4ohm Bass Driver:

• Miller & Kreisel (M&K) V-850 maple sub-woofer cabinet
  18"/15.25"/17.25" (same size as the VX-1250 without the amp, you just need
  to cut the amplifier hole bigger); (1)
• Original M&K Black cloth grill; (1)
• 12" speaker gasket; (1)
  
• Black anodized M6 bolts to seal 4 holes the cabinets have that need to be closed up; (4)
• Black anodized 8/32" bolts for mounting the driver; (4)
• Nail-in cabinet glides; (4) (use these on the side with the 4 aforementioned holes).
• Kit
  also includes 1.5lbs of poly-fill stuffing and a piece of screen to
  staple in the cabinet to protect the amplifier components from the
  poly-fill.

We're going
through the Miller & Kreisel surplus we acquired at the bankruptcy
auction. The stock has been separated into three categories; Like new
A-Stock, minor blemishes and dings B-stock, and anything with actual
structural damage that would make it acoustically unsound goes in the
trash.

This product (and all products sold by deep Surplus) is
covered by the Deep Surplus 90-day unconditional money-back return
policy. Please note that this product consists of genuine MK components
purchased at the Miller and Kreisel Sound, Inc. bankruptcy auction.
Deep Surplus is not an authorized MK dealer and you should do your own
inspection or testing to determine whether this product is suitable for
your intended use. Miller and Kreisel Sound, Inc. does not extend any
express or implied guarantees, representations, or warranties with
respect to this product.

Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  V-851 / VX-1250

Do It Yourself Silver (Paintable) Sub-woofer Cabinet Kit; Miller & Kreisel (M&K) V-851/VX-1250, A-Stock.

Everything you need except an amp and driver:

• Miller & Kreisel V-851 silver (paintable) sub-woofer cabinet
  18"/15.4"/17.25" (same size as the VX-1250 without the amp, you just need
  to cut the amplifier hole bigger); (1)
• Original M&K Silver metal mesh grill; (1)
• 12" speaker gasket; (1)
  
• Black anodized M6 bolts to seal 4 holes the cabinets have that need to be closed up; (4)
• Black anodized 8/32" bolts for mounting the driver; (4)
• Black anodized 8/32" bolts for mounting the amplifier; (8)
• Nail-in cabinet glides; (4) (use these on the side with the 4 aforementioned holes).
• Kit
  also includes 1.5lbs of poly-fill stuffing and a piece of screen to
  staple in the cabinet to protect the amplifier components from the
  poly-fill.

We're going
through the Miller & Kreisel surplus we acquired at the bankruptcy
auction. The stock has been separated into three categories; Like new
A-Stock, minor blemishes and dings B-stock, and anything with actual
structural damage that would make it acoustically unsound goes in the
trash.

This product (and all products sold by deep Surplus) is
covered by the Deep Surplus 90-day unconditional money-back return
policy. Please note that this product consists of genuine MK components
purchased at the Miller and Kreisel Sound, Inc. bankruptcy auction.
Deep Surplus is not an authorized MK dealer and you should do your own
inspection or testing to determine whether this product is suitable for
your intended use. Miller and Kreisel Sound, Inc. does not extend any
express or implied guarantees, representations, or warranties with
respect to this product.

Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  V-75 / VX-1250

Do It Yourself Cherry Sub-woofer Cabinet Kit; Miller & Kreisel (M&K) V-75/VX-1250, A-Stock.

Everything you need except a <Miller & Kreisel (M&K) VX-1250 Sub-woofer Plate Amplifier, and <12" 4ohm Bass Driver:

• Miller & Kreisel (M&K) V-75 cherry sub-woofer cabinet
  18"/15.4"/17.25" (same size as the VX-1250 without the amp, you just need
  to cut the amplifier hole bigger); (1)
• Original M&K Black cloth grill;
  (1) (Needs modification to fit)
  
• 12" speaker gasket;
  (1)
  
• Black anodized M6 bolts to seal 4 holes the cabinets have that need to be closed up;
  (4)
• Black anodized 8/32" bolts for mounting the driver;
  (4)
• Nail-in cabinet glides;
  (4) (use these on the side with the 4 aforementioned holes).
• Kit
  also includes 1.5lbs of poly-fill stuffing and a piece of screen to
  staple in the cabinet to protect the amplifier components from the
  poly-fill.

We're going
through the Miller & Kreisel surplus we acquired at the bankruptcy
auction. The stock has been separated into three categories; Like new
A-Stock, minor blemishes and dings B-stock, and anything with actual
structural damage that would make it acoustically unsound goes in the
trash.

This product (and all products sold by deep Surplus) is
covered by the Deep Surplus 90-day unconditional money-back return
policy. Please note that this product consists of genuine MK components
purchased at the Miller and Kreisel Sound, Inc. bankruptcy auction.
Deep Surplus is not an authorized MK dealer and you should do your own
inspection or testing to determine whether this product is suitable for
your intended use. Miller and Kreisel Sound, Inc. does not extend any
express or implied guarantees, representations, or warranties with
respect to this product.

Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  V-1250 / VX-1250

Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  V-851 / VX-1250

Do It Yourself White (Paint-able) Sub-woofer Cabinet Kit; Miller & Kreisel (M&K) V-851/VX-1250, A-Stock.

Everything you need except a <Miller & Kreisel (M&K) VX-1250 Sub-woofer Plate Amplifier, and <12" 4ohm Bass Driver:

• Miller & Kreisel V-851 white (paint-able) sub-woofer cabinet 18"/15.4"/17.25" (same size as the VX-1250 without the amp, you just need to cut the amplifier hole bigger); (1)
• Original M&K white cloth grill; (1) (we have a white metal mesh grill also that is paintable in our speaker grill section)
  
• 12" speaker gasket; (1)
  
• Black anodized M6 bolts to seal 4 holes the cabinets have that need to be closed up; (4)
• Black anodized 8/32" bolts for mounting the driver; (4)
• Black anodized 8/32" bolts for mounting the amplifier; (8)
• Nail-in cabinet glides; (4) (use these on the side with the 4 aforementioned holes).
• Kit also includes 1.5lbs of poly-fill stuffing and a piece of screen to staple in the cabinet to protect the amplifier components from the poly-fill.

We're going through the Miller & Kreisel surplus we acquired at the bankruptcy auction. The stock has been separated into three categories; Like new A-Stock, minor blemishes and dings B-stock, and anything with actual structural damage that would make it acoustically unsound goes in the trash.

This product (and all products sold by deep Surplus) is covered by the Deep Surplus 90-day unconditional money-back return policy. Please note that this product consists of genuine MK components purchased at the Miller and Kreisel Sound, Inc. bankruptcy auction. Deep Surplus is not an authorized MK dealer and you should do your own inspection or testing to determine whether this product is suitable for your intended use. Miller and Kreisel Sound, Inc. does not extend any express or implied guarantees, representations, or warranties with respect to this product.

Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  MPS-5420

Push-Pull 2X12 Sub-woofer Cabinet DIY Kit; Miller & Kreisel (M&K) MPS-5420; A-Stock, Black Matte.

Everything you need except a <Miller & Kreisel (M&K) VX-1250 Sub-woofer Plate Amplifier, and <12" 8ohm Bass Driver:

• MPS-5420; A-Stock, black matte 2X12 push-pull sub-woofer cabinet ( 27"H X 15.5"W X 22"D) includes grill; made by Miller & Kreisel (M&K)
• 12" speaker gasket; (1) (2nd speaker is pointing into the box, most 12" drivers have a gasket already)
  
• 6-32 X 1-1/14" Phillips Truss Head Machine Screw; Steel Black Oxide (bolts for mounting the amplifier and Plate) (18)
• Black anodized 8-32" bolts for mounting the Speakers; (26)
• 6-32 X 1/4" Spiked T-Nuts (8)
  
• Kit also includes 3.5lbs of poly-fill stuffing and a piece of screen to staple in the cabinet to protect the amplifier components from the poly-fill.
• 2-Wire Harness for 2nd speaker & Crimp connectors.
• Filler Plates (if you want to cover the amp hole); 2

NOTE: Due to the fact that these are large, heavy, oversize packages we do not ship these internationally.

We're going through the Miller & Kreisel surplus we acquired at the bankruptcy auction. The stock has been separated into three categories; Like new A-Stock, minor blemishes and dings B-stock, and anything with actual structural damage that would make it acoustically unsound goes in the trash.

This product (and all products sold by Deep Surplus) is covered by the Deep Surplus 90-day unconditional money-back return policy.


Please note that this product consists of genuine MK components purchased at the Miller and Kreisel Sound, Inc. bankruptcy auction. Deep Surplus is not an authorized MK dealer and you should do your own inspection or testing to determine whether this product is suitable for your intended use. Miller and Kreisel Sound, Inc. does not extend any express or implied guarantees, representations, or warranties with respect to this product.

Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  MPS-5160 / MPS-5100

Miller & Kriesel (M & K) MPS-5160SFBF Empty Push-Pull 2X12 Backfire Sub-Woofer Cabinet; Silver (Paintable), A-Stock
 
The amp opening is 10-1/2" X 7-5/8" (if you take that piece of wood in there out you can expand the hole to 13" X 7-5/8". Another solution is to close that whole area up with a blank plate and to mount whatever amplifier you want on the front of the cabinet (of course it won't be a backfire sub anymore, but you can have whatever wattage you need).

Everything you need to build your own MPS-5160SFBF except Miller & Kreisel (M&K) MPS-5160 Sub-woofer Plate Amplifier & 8 Ohm Subwoofer driver; Replacement for Miller and Kriesel Push-Pull Sub-woofers

Do it yourself kit includes:

• Miller & Kreisel (M&K) MPS-5160SFBF push-pull 2X12 sub-woofer cabinet (32"H X 15.5"W X 22"D), includes grill; Black Matte.
• 6/32 bolts; black
  
• 8/32 bolts; black
• Wood screws; Black
  
• Speaker gasket
• Amplifier mounting plate
• Hole cover (if wanted)
• Acoustical speaker stuffing
• Wire harness & Connectors
  

NOTE: Due to the fact that these are large, heavy, oversize packages we do not ship these internationally.

We're going
through the Miller & Kreisel surplus we acquired at the bankruptcy
auction. The stock has been separated into three categories; Like new A-Stock, minor blemishes and dings B-stock, and anything with actual structural damage that would make it acoustically unsound goes in the trash.

This product (and all products sold by Deep Surplus) is covered by the Deep Surplus 90-day unconditional money-back return policy.

Please note that this product consists of genuine MK components purchased at the Miller and Kreisel Sound, Inc. bankruptcy auction. Deep Surplus is not an authorized MK dealer and you should do your own inspection or testing to determine whether this product is suitable for your intended use. Miller and Kreisel Sound, Inc. does not extend any express or implied guarantees, representations, or warranties with respect to this product.

Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  MPS-5160 / MPS-5100

Miller & Kriesel (M & K) MPS-5160SFBF Empty Push-Pull 2X12 Backfire Sub-Woofer Cabinet; Black, A-Stock

The amp opening is 10-1/2" X 7-5/8" (if you take that piece of wood in there out you can expand the hole to 13" X 7-5/8". Another solution is to close that whole area up with a blank plate and to mount whatever amplifier you want on the front of the cabinet (of course it won't be a backfire sub anymore, but you can have whatever wattage you need).

Everything you need to build your own MPS-5160SFBF except Miller & Kreisel (M&K) MPS-5160 Sub-woofer Plate Amplifier & 8 Ohm Subwoofer driver; Replacement for Miller and Kriesel Push-Pull Sub-woofers

Do it yourself kit includes:

• Miller & Kreisel (M&K) MPS-5160SFBF push-pull 2X12 sub-woofer cabinet (32"H X 15.5"W X 22"D), includes grill; Black Matte.
• 6/32 bolts; black
  
• 8/32 bolts; black
• Wood screws; Black
  
• Speaker gasket
• Amplifier mounting plate
• Hole cover (if wanted)
• Acoustical speaker stuffing
• Wire harness & Connectors
  

NOTE: Due to the fact that these are large, heavy, oversize packages we do not ship these internationally.

We're going
through the Miller & Kreisel surplus we acquired at the bankruptcy
auction. The stock has been separated into three categories; Like new A-Stock, minor blemishes and dings B-stock, and anything with actual structural damage that would make it acoustically unsound goes in the trash.

This product (and all products sold by Deep Surplus) is covered by the Deep Surplus 90-day unconditional money-back return policy.

Please note that this product consists of genuine MK components purchased at the Miller and Kreisel Sound, Inc. bankruptcy auction. Deep Surplus is not an authorized MK dealer and you should do your own inspection or testing to determine whether this product is suitable for your intended use. Miller and Kreisel Sound, Inc. does not extend any express or implied guarantees, representations, or warranties with respect to this product.

Condition:  New
Mfg:  Miller & Kreisel (M&K)
P/N:  V-851 / VX-1250

Do It Yourself Cherry Sub-woofer Cabinet Kit; Miller & Kreisel (M&K) V-860/VX-1250, A-Stock.

Everything you need except a <Miller & Kreisel (M&K) VX-1250 Sub-woofer Plate Amplifier, and <12" 4ohm Bass Driver:

• Miller & Kreisel V-860 Cherry sub-woofer cabinet
  15"/15"/15"; (1)
• Original M&K black cloth grill; (1)
  
• 12" speaker gasket; (1)
  
• Black anodized 8/32" bolts for mounting the driver; (8)
• Black anodized 6/32" bolts for mounting the amplifier; (8)
• Nail-in cabinet glides; (4) (use these on the side with the 4 aforementioned holes).
• Kit
  also includes 1.5lbs of poly-fill stuffing and a piece of screen to
  staple in the cabinet to protect the amplifier components from the
  poly-fill.

We're going
through the Miller & Kreisel surplus we acquired at the bankruptcy
auction. The stock has been separated into three categories; Like new
A-Stock, minor blemishes and dings B-stock, and anything with actual
structural damage that would make it acoustically unsound goes in the
trash.

This product (and all products sold by deep Surplus) is
covered by the Deep Surplus 90-day unconditional money-back return
policy. Please note that this product consists of genuine MK components
purchased at the Miller and Kreisel Sound, Inc. bankruptcy auction.
Deep Surplus is not an authorized MK dealer and you should do your own
inspection or testing to determine whether this product is suitable for
your intended use. Miller and Kreisel Sound, Inc. does not extend any
express or implied guarantees, representations, or warranties with
respect to this product.