Equipment Rack Shelves & Rails

Condition:  New
Mfg:  Abergetty
P/N:  HW500-1

Made from 16 AWG Steel and with a Black Satin finish, this shelf includes both 10-32 and 12-24 Phillips screws and protective washers for ready mounting.

Measurements are: 14" Depth, 19.25" Width, 3.5" Height.

Can be used for flat surface orientation, enclosed border orientation, or wall mount orientation.

Condition:  New
Mfg:  Abergetty
P/N:  HW500-2

Made from Heavy Gauge Steel Construction and constructed with 14 Gauge cold rolled steel for a 200lb load rating.

This shelf includes both 10-32 and 12-24 Phillips screws and protective washers for ready mounting.

Measurements are: 20" Depth, 19.25" Width, 4" Height.

Can be mounted on racks or cabinents. Can also be used as a keyboard shelf.

Condition:  New
Mfg:  Abergetty
P/N:  HW500-3

Made from Heavy Gauge Steel Construction and constructed with 14 Gauge cold rolled steel for a 200lb load rating.

This shelf includes both 10-32 and 12-24 Phillips screws and protective washers for ready mounting.

Measurements are: 20" Depth, 19.25" Width, 4" Height.

Can be mounted on racks or cabinents. Can also be used as a keyboard shelf.

Condition:  New
Mfg:  Abergetty
P/N:  HW500-4

This handy keyboard/shelf is made from 16 Gauge steel with a Satin black finish.

The mouse pad includes a satin textured pad finish surface that can be mounted on either the right or left side. The keyboard shelf slides are ball self lubricating ball bearing and include a positive click stop upon extension which prevents the shelf from unwanted retracting.

The two shelf surfaces available are the retractable lower shelf which accommodates a standard "qwerty" (16" or smaller) style keyboard or the upper shelf which accommodates a wider "101 style" keyboard. The upper surface also includes a front lip and large surface area for monitors or other hardware.

The shelf includes both 10-32 and 12-24 mounting screw kits which are included to allow mounting on either thread pattern.

Measurements are: 14" collapsed Depth, 19.25" Width, 16" and 19" Keyboard and Shelf Width, 3.5" Height. Can hold up to 50 lbs.

Condition:  New
Mfg:  Abergetty
P/N:  HW510

These rails are made from 14 Gauge Cold Rolled Steel with a Satin black finish.

The rails kit includes a right adjustable rail system, and a left adjustable rail system. It also includes a mounting hardware kit with both 10-32 and 12-24 mounting screw kits which are included to allow mounting on either thread pattern.

The rails take up 1U of space and can support up to 200lbs when installed on a four post rack or cabinet.

Measurements are: 20.25" to 33.25" Depth; 19", 23", 30" Width; and 1.25" Height.