CAT 6 Patch Panels

This is a 24 port CAT 6 19" patch panel. The terminations on the back side are industry standard 110, the height is 1U, 1 rack unit, 1.75 inches, and the color is black.

There are easy to follow multi-colored markings to allow for either 568A or 568B wiring schemes, 568B is commonly used for data. The tool that is required to connect the wires to the rear of the panel an industry standard 110 punch down tool, our part number TL231-A.

For mounting, the panel can be attatched to a wall with our 1U hinged wall mounting bracket, HW410-WM-1U, If you already have an industry standard 19 inch relay rack this unit just has to be screwed in and you're ready to go.

This is a 48 port CAT 6 19" patch panel. The terminations on the back side are industry standard 110, the height is 2U, 2 rack units, 3.5 inches, and the color is black.

There are easy to follow multi-colored markings to allow for either 568A or 568B wiring schemes, 568B is commonly used for data. The tool that is required to connect the wires to the rear of the panel an industry standard 110 punch down tool, our part number TL231-A.

For mounting, the panel can be attatched to a wall with our 2U hinged wall mounting bracket, HW410-WM-2U, If you already have an industry standard 19 inch relay rack this unit just has to be screwed in and you're ready to go.

This is a 96 port CAT 6 patch panel that can be mounted on a data rack. The terminations on the back side are industry standard 110. The color is black.

There are easy to follow multi-colored markings to allow for either 568A or 568B wiring schemes, 568B is commonly used for data., The tool that is required to connect the wires to the rear of the panel is an industry standard 110 punch down tool, our part number TL231-A.

The dimensions are 10", length, X 2 1/4", width X 1 1/2", height.

For mounting, the panel can be attatched to a wall with our 2U hinged wall mounting bracket, HW410-WM-4U, If you already have an industry standard 19 inch relay rack this unit just has to be screwed in and you're ready to go.

This is a 16 port shielded CAT 6 19" patch panel. The terminations on the back side are industry standard 110, the height is 1U, 1 rack unit, 1.75 inches, and the color is black.

There are easy to follow multi-colored markings to allow for either 568A or 568B wiring schemes, 568B is commonly used for data. The tool that is required to connect the wires to the rear of the panel an industry standard 110 punch down tool, our part number TL231-A.

For mounting, this shielded panel can be attatched to a wall with our 7U hinged wall mounting bracket, HW410-WM-7U, If you already have an industry standard 19 inch relay rack this unit just has to be screwed in and your ready to go.