19.5" Support for Outdoor Wall Plates & Light Fixtures- Green
These supports are handy for installing a light fixture and/or GFCI devices oudoors. They are made from UV rated plastic for long outdoor life, and come in 4 non-chipping colors and 2 different heights.
Has a molded-in color which is permanent. This is unlike other painted posts where lawn equipment chips the color off.
There are openings on both sides of the post for back-to-back power.
The low voltage separator provides for Power use on one side and Low Voltage on the other.
It has built-in stabilizers that need no assembly and provide rigid support.
The 19.5" supports offer greater use of above ground height. The 26" supports offer taller design and provide additional height for wiring devices and increased burial depth.
Has angle cut posts for easy access to underground wiring.
Has (2) 1/2" KOs for a UL Listed enclosure.
Comes with 3/4" x 1/2" NPT metal reducing bushing, locknut with copper ground wire for fixture installation, (2) blank device plates, gaskets & screws, plug for top hole (when fixture is not installed), low voltage separator, and a removable KO plate.